Products

Trekking poles

Trekking poles made by italian manufacturer Cober.

Telescopic foldable in 3 segmets. Adjustable from 63 to 140 cm.

Made of aluminium. Lenght folded: 63 cm.

Briko Steel Structure Brush

This brush is recommended for professional use to free hardened, oxydized or brunt bases, allowing the wax to penetrate deep.

Restores the optimal functionality of membrane textiles (e.g. GORE-TEX®)

• Caring and thorough cleaning by carefully selected, active washing substances

• Contains no dyes, optical bleaches, whiteners or phosphates

• Based on renewable raw materials

• Very biodegradable

• Also effective at low wash temperatures

• Concentrate, one bottle is sufficient for around 10 washes.

SWIX Waxing Bench 120 x 45 cm

VOLA 3 and 4 mm scraper sharpener. To sharpen the plexi scrapers, never unsharpned scrapers!

Metal grip piece of 50 cm, used to repair deep holes near the core or the edges of the skis or snowboards.

Watch application video (it's the second video, the advanced one, step 2).

Two points of anchorage SKIMAN ski vises. These, allow to work within the skis in three positions: flat, sided and oblique (60º), for more comfort when being in the workshop.

Universal liquid wax, 100ml pocket size, from the Swiss manufacturer TOKO.

The same container its the wax polisher, so, you can set up your skis or snowboard on a record time.

Metal grip piece of 50 cm to repair deep holes near the core or the edges of the skis or snowboards.

Watch application video (it's the second video of the advanced one, step 2).

Natural cork bursh for waxing skis or snowboards with the use of liquid and rub-on waxes.

Application: after applying the wax with the use of a felt cloth, rub-on with the cork brush, and then, polish with the use of a nylon brush.

Two hardness oxide aluminium stones (pink and white) to remove burrs before sharpening skis or snowboard edges.

Also used to smooth edge sharpening on the first span of the edges, and so, avoid to get back on.

Size: 6,5 cm.

STADIUM diamond cleaner, to clean the diamond files from ferrite after sharpening skis or snowboard edges.

VOLA diamond file for sharpening skis or snowboard edges. This diamond file has super fine grit (1000).

Its use is recommended after using other grits, like 600. 

Diamond file grain 600 by Diaface.

Used for the finishing of the skis or snowboard edges. 

Recommended after the diamond file of grit 400.

Medium grit (400) diamond file by Diaface.

Used for finishing the edges of skis or snowboards.

Recommended after the diamond file of grit 200.

Diamond file grit 200 by Diaface for the finishing of your ski or snowboard edges.

Recommended after the file or after the diamond file of grit 100.

Size: 10 cm.

VOLA Side edge file guide with fixing system, 88º.

VOLA hanging edge sharpener, from 0.5º to 1.5º, steps of 0.25º.

Graphite black p-tex candle, diameter 8mm, VOLA. Recommeded for repairing big scratches or holes your skis or snowboard base.

1000W Power iron by VOLA for waxing skis and snowboards.

Specially designed for ski and snowboard waxing.

Adjustable thermostat from 60 ºC to 180 ºC.

VOLA liquid wax remover for squis or snowboards, 250 ml.

Recommended to remove dirt or old wax from your skis or your snowboard base.

The finest brush. Recommended on the last stage of polishing the of your skis or snowboard, after the nylon or soft nylon brush, to polish the base and give it antistatic properties.

Very hard brass brush with thick picks.

Recommended to clean the skis or snowboard base from impurities (or old wax) with the help of wax remover.

Some also use it as first brush after waxing. Nice finish and handle made of wood.

This brush frees hardened, oxidized or burnt bases, allowing wax to penetrate deep.

Warning: not for brushing out or cleaning base structure after scraping waxed bases.